Related papers: Decomposition process in a FeAuPd alloy nanostruct…
The creep behaviour and microstructural evolution of a Sn-3Ag-0.5Cu wt.% sample with a columnar microstructure have been investigated through in-situ creep testing under constant stress of 30 MPa at 298 K. This is important, as 298 K is…
Amorphous/crystalline multilayer structures of Fe-P alloys were deposited electrochemically using the single bath technique. Hall-Petch behavior of microhardness with respect to sublayer thickness was observed down to a sublayer thickness…
Mechanical alloying (MA) has been used to fabricate the Co2FeAl Heusler alloy with a nanocrystalline structure. The formation mechanism of the alloy has been investigated. Rietveld analysis showed that all samples that were milled for more…
Although nanocrystalline alloys regularly exhibit high strengths, their use in structural applications often face challenges due to sample size limitations, unstable microstructures, and the limited ability to plastically deform. The…
The heat-treatment of a number of gas atomised aluminium alloys prior to cold spraying recently showed that the resultant microstructural modification was accompanied by an improvement in deposition; however, the relationship between the…
In the present investigation, the chemical leaching of the poly-grain Al65Cu15Co20 and Al65Cu20Co15 decagonal quasicrystalline alloy have been studied. The polished surfaces of as-cast alloys were leached with 10 mole NaOH solution for 0.5-…
Concentrated solid solution alloys (CSAs) have attracted attention for their promising properties; however, current manufacturing methods face challenges in complexity, high costs, and limited scalability, raising concerns about industrial…
In the Cu Cr system, the formation of supersaturated solid solutions can be obtained by severe plastic deformation. Energy dispersive synchrotron diffraction measurements on as deformed Cu Cr samples as a function of the applied strain…
Metal powders with hierarchical nanostructures are always designed and fabricated by dealloying with or without combination of other manufacturing processes. However, they are mainly nanoporous metal powder and its derivations, and their…
The search for effective methods to fabricate bulk single-phase quasicrystalline Al-Cu-Fe alloys is currently an important task. Crucial to solving this problem is to understand mechanisms of phase formation in this system. Here we study…
Understanding the composition evolution of grain boundaries and grain boundary precipitation at near-atomic scale in aluminum alloys is crucial to tailor mechanical properties and to increase resistance to corrosion and stress corrosion…
Unlike the tensile mode, compressive deformation of a bcc metallic nanostructure is mediated by the glide of screw dislocation. Although the bcc screw dislocations are well known to possess unusual attributes, it is still unclear how these…
A systematic investigation has been performed to optimize the microstructure of $\mathrm{L1_0-FePt-SiO_x}$ granular thin film as recording media for heat-assisted magnetic recording. The FePt-BN nucleation layer, which is stable even at…
The origin of cube recrystallization texture in medium to high stacking-fault energy fcc metals has been debated for almost 70 years. Despite numerous experimental and simulation studies, many issues regarding the nucleation and growth of…
The microstructural and compositional evolution of intergranular carbides and borides prior to and after creep deformation at 850 $^\circ$C in a polycrystalline nickel-based superalloy was studied. Primary MC carbides, enveloped within…
Thin films consisting of Ag and Au nanoparticles embedded in amorphous ZrO2 matrix were grown by pulsed laser deposition in a wide range of metal volume concentrations in the dielectric regime (0.08<x(Ag)<0.28 and 0.08<x(Au)<0.52). High…
In the nanometric scale, alloy nanomaterials behave as new materials since they are able to display structures and properties which are different from those of the pure metal nanostructures or bulk alloys. In this work, the compositional…
Solidification is an important process in many alloy processing routes. The solidified microstructure of alloys is usually made up of dendrites, eutectics or a combination of both. The evolving morphologies are largely determined by the…
Controlling microstructure in fusion-based metal additive manufacturing (AM) remains a challenge due to numerous parameters directly impacting solidification conditions. Multiprincipal element alloys (MPEAs) offer a vast compositional…
Nanocrystalline metals contain a large fraction of high-energy grain boundaries, which may be considered as glassy phases. Consequently, with decreasing grain size, a crossover in the deformation behaviour of nanocrystals to that of…