Related papers: A Hot Cavity Laser Ion Source at IGISOL
Hot cavity resonant ionization laser ion sources (RILIS) provide a multitude of radioactive ion beams with high ionization efficiency and element selective ionization. However, in hot cavity RILIS there still remains isobaric contaminations…
A laser ion source is under development at the IGISOL facility, Jyvaskyla, in order to address deficiencies in the ion guide technique. The key elements of interest are those of a refractory nature, whose isotopes and isomers are widely…
The laser ion source project at the IGISOL facility, Jyvaskyla, has motivated the development and construction of an rf sextupole ion beam guide (SPIG) to replace the original skimmer electrode. The SPIG has been tested both off-line and…
A new type of the gas cell for the resonance ionization laser ion source at the Leuven Isotope Separator On Line (LISOL) has been developed and tested at off-line and on-line conditions. Two-step selective laser ionization is applied to…
An off-line ion source station has been commissioned at the IGISOL (Ion Guide Isotope Separator On-Line) facility. It offers the infrastructure needed to produce stable ion beams from three off-line ion sources in parallel with the…
The thick-target ISOL (Isotope mass Separation OnLine) method provides beams of more than 1000 radionuclides of 74 elements. The method is well established for elements with sufficiently high volatility at ca. 2000 {\deg}C. To extract…
Nanoscale focused ion beams (FIBs) represent one of the most useful tools in nanotechnology, enabling nanofabrication via milling and gas-assisted deposition, microscopy and microanalysis, and selective, spatially resolved doping of…
The proof of principle of the Laser Ion Source Trap (LIST) coupled to a gas cell catcher system has been demonstrated at the Leuven Isotope Separator On-Line (LISOL). The experiments were carried out by using the modified gas cell-based…
A new laser ion source configuration based on resonant photoionization in a gas cell has been developed at RIBF RIKEN. This system is intended for the future PArasitic RI-beam production by Laser Ion-Source (PALIS) project which will be…
We describe a high-power, frequency-tunable, external cavity diode laser (ECDL) system near 626 nm useful for laser cooling of trapped $^9$Be$^+$ ions. A commercial single-mode laser diode with rated power output of 170 mW at 635 nm is…
A two-step photoionization strategy of an ultracold rubidium beam for application in a focused ion beam instrument is analyzed and implemented. In this strategy the atomic beam is partly selected with an aperture after which the transmitted…
We demonstrate a compact ion beam device capable of accelerating H$^+$ and D$^+$ ions up to 75keV energy, on to a solid target, with sufficient beam current to study fusion reactions. The ion beam system uses a microwave driven plasma…
We report on the design, installation, and test of an experimental facility for the production of ultra-cold atomic isotopes and isomers of cesium. The setup covers a broad span of mass numbers and nuclear isomers, allowing one to directly…
The $^{133}\mathrm{Ba}^+$ ion is a promising candidate as a high-fidelity qubit, and the $^{137}\mathrm{Ba}^+$ isotope is promising as a high-fidelity qudit ($d>2$). Barium metal is very reactive, and $^{133}\mathrm{Ba}^+$ is radioactive…
We produce large numbers of low-energy ions by photoionization of laser-cooled atoms inside a surface-electrode-based Paul trap. The isotope-selective trap loading rate of $4\times10^{5}$ Yb$^{+}$ ions/s exceeds that attained by…
The TULIP project aims to produce radioactive ion beams of short-lived neutron-deficient isotopes by using fusion-evaporation reactions in an optimized Target Ion Source System (TISS). The first step consisted of the design of a TISS to…
The ISAC polarized beam facility uses a Ti:Sapphire laser for producing spin-polarized beams of short-lived radioactive isotopes, initially 7Li. The laser power and spectral content must be tightly controlled and monitored. The control…
Fast ignition is an alternative concept of laser fusion in which the task of compressing the fusion pellet to supersolid densities is accomplished by the conventional high energy nanosecond glass lasers and the task of igniting the…
A compact low-energy and high-intensity electron source for material aging applications is presented. A laser-induced plasma moves inside a 30 kV diode and produces a 5 MW electron beam at the anode location. The corresponding dose that can…
This chapter provides an overview of the basic requirements for ion sources designed and operated in radioactive ion beam facilities. The facilities where these sources are operated exploit the isotope separation online (ISOL) technique, in…