Related papers: DAFNE Operating Experience with Crab Waist Collisi…
DAFNE, the Frascati phi factory, has been in operation since 1999. At the center of the physics program is the KLOE experiment, a multipurpose detector with optimizations for tagged and interferometry-based measurements of the neutral kaon…
Current bearing wire compensators were successfully used in the 2005-2006 run of the DA{\Phi}NE collider to mitigate the detrimental effects of parasitic beam-beam interactions. A marked improvement of the positron beam lifetime was…
Long-range beam-beam interactions (parasitic crossings) were one of the main luminosity performance limitations for the lepton F-factory DAFNE in its original configuration. In particular, the parasitic crossings led to a substantial…
Beam collisions with a crossing angle at the interaction point have been applied in high intensity colliders to reduce the effects of parasitic collisions which induce emittance growth and beam lifetime deterioration. The crossing angle…
The Future Circular Collider (FCC) study aims at designing different options of a post-LHC collider. The high luminosity electron-positron collider FCC-ee based on the crab waist concept is considered as an intermediate step on the way…
We present the physics case of DAFNE-2, an $e^+e^-$ collider expected to deliver 20-50 fb$^{-1}$ at the $\phi(1020)$ peak, and $\sim$ 5 fb$^{-1}$ in the energy region between 1 and 2.5 GeV.
We give an overview of presentations and discussions during the Accelerator Working Group Session dedicated to High Luminosity Issues for a future upgrade of the Frascati e+e- Phi-Factory DAPhNE at the Workshop "e+e- in the 1-2 GeV range:…
An innovatory interaction region has been recently conceived and realized on the Frascati DA{\Phi}NE lepton collider. The concept of tight focusing and small crossing angle adopted until now to achieve high luminosity in multibunch…
An innovatory interaction region has been recently conceived and realized on the Frascati DA{\Phi}NE lepton collider. The concept of tight focusing and small crossing angle adopted to achieve high luminosity in multibunch collisions has…
The response of an aircraft fan blade manufactured by composites under the action of static and impact load has been studied in this report. The modeling and analysis of the geometry has been done using CASTEM 2007 version. For the quasi…
The SIDDHARTA-2 collaboration at the INFN Laboratories of Frascati (LNF) aims to perform groundbreaking measurements on kaonic atoms. In parallel and beyond the ongoing kaonic deuterium, presently running on the DA$\Phi$NE collider at LNF,…
The beam-beam interaction is one of the most critical factors determining the luminosity performance of colliders. As a circular collider utilizing the crab-waist scheme, multiple factors, such as beam-beam, crab waist, impedances, etc.,…
Numerical simulations of beam-beam effects in the electron-positron Phi-factory DAPhNE taking into account the measured cubic nonlinearities have shown that the nonlinearities have a strong impact on the collider luminosity performance. The…
This note summarizes the major design changes from the plasma wakefield linear collider concept presented at Snowmass 2013 to the most recent HALHF 2.0 baseline.
The major goal of the KLOE experiment is to measure Re(epsilon' /epsilon) in the kkbar system, with a precision of 10^{-4},both via the traditional double ratio method and quantum interferometry. The experiment has started taking data at…
Presently clearing electrodes are being considered as a possible cure of e-cloud driven problems in existing and future colliders. 'Invisible' electrodes, made of a thin highly resistive layer pasted on a dielectric plate, have been…
A scintillating-fiber beam profile detector has been designed, built and tested, for the monitoring of the position and size of the electron beam of the DAFNE, the recently commissioned electron beam-test facility at the Frascati LNF. A…
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90…
The US will be contributing to the HL-LHC upgrade at CERN with the fabrication and qualification of RFD crabbing cavities in the framework of the HL-LHC Accelerator Upgrade Project (AUP) managed by Fermilab. AUP received Critical Decision 3…
This proceeding provides an expanded overview of the Fast Interaction Trigger (FIT) system performance, focusing on new developments such as the prospective integration of the ALICE Low-Level Front-End Device (ALFRED) into the Detector…