Related papers: The diagnostics subsystem on board LISA PathFinder…
Performance demands for high and super-high luminosity at the LHC (up to 10^35 cm^(-2) sec^(-1) after the 2017 shutdown) and at future colliders demand high resolution tracking detectors with very fast time response and excellent temporal…
The European Space Agency (ESA) and the National Aeronautics and Space Administration (NASA) are planning the Laser Interferometer Space Antenna (LISA) mission in order to detect GW. The need of accurate testing of free-fall and knowledge…
The LISA Pathfinder data analysis team has been developing in the last years the infrastructure and methods required to run the mission during flight operations. These are gathered in the LTPDA toolbox, an object oriented MATLAB toolbox…
High-resolution temperature measurements are required in the LTP, i.e., 10 uK/sqrt(Hz) from 1 mHz to 30 mHz. This has been already accomplished with thermistors and a suitable low noise electronics. However, the frequency range of interest…
The scientific objectives of the Lisa Technology Package (LTP) experiment, on board of the LISA Pathfinder mission, demand for an accurate calibration and validation of the data analysis tools in advance of the mission launch. The levels of…
LISA Pathfinder is a mission planned by the European Space Agency to test the key technologies that will allow the detection of gravitational waves in space. The instrument on-board, the LISA Technology package, will undergo an exhaustive…
A main scientific output of the LISA Pathfinder mission is to provide a noise model that can be extended to the future gravitational wave observatory, LISA. The success of the mission depends thus upon a deep understanding of the…
Foot temperature profiling is of utmost importance is mitigating the adverse effects due to foot complications especially due to diabetes. Contactless temperature monitoring methods could be used effectively in large scale for patient…
An elegant breadboard model of the LISA phasemeter is currently under development by a Danish-German consortium. The breadboard is build in the frame of an ESA technology development activity to demonstrate the feasibility and readiness of…
The Laser Interferometer Space Antenna (LISA) of the European Space Agency (ESA) will be the first low-frequency gravitational-wave observatory orbiting the Sun at 1 AU. The LISA Pathfinder (LPF) mission, aiming at testing of the…
We report on recent progress and next steps in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC as part of the Snowmass 2021 process. Our understanding of backgrounds has greatly improved, aided by…
The transition radiation tracker (TRT) is the outermost of the three sub-systems of the ATLAS inner detector at the Large Hadron Collider (LHC) at CERN. It is designed to combine the drift tube tracker with the transition radiation…
Future short or long-term space missions require a new generation of monitoring and diagnostic systems due to communication impasses as well as limitations in specialized crew and equipment. Machine learning supported diagnostic systems…
This paper addresses the design and implementation of a real time temperature monitoring system with applications in telemedicine. The system consists of a number of precision wireless thermometers which are conceived and realized to…
The histological assessment of human tissue has emerged as the key challenge for detection and treatment of cancer. A plethora of different data sources ranging from tissue microarray data to gene expression, proteomics or metabolomics data…
Currently, lower limb robotic rehabilitation is widely developed, However, the devices used so far seem to not have a uniform criteria for their design, because, on the contrary, each developed mechanism is often presented as if it does not…
A new LISA simulator (LISACode) is presented. Its ambition is to achieve a new degree of sophistication allowing to map, as closely as possible, the impact of the different sub-systems on the measurements. LISACode is not a detailed…
The aim of this paper consists in defining the hardware and software architecture of an embedded system, based on RFID technology, in order to identify patients and to achieve real time information concerning the patients biometric data,…
This article reports on the development and experimental results of commercial plasma display panels adapted for their potential use as micropattern gas radiation detectors. The plasma panel sensors (PPS) design an materials include glass…
The purpose of this paper is twofold. First, we will present recent results on the data processing for LISA, including algorithms for elimination of clock jitter noise and discussion of the generation of the data averages that will…