Related papers: Poromechanical behaviour of hardened cement paste …
Understanding surface mechanics of soft solids, such as soft polymeric gels, is crucial in many engineering processes, such as dynamic wetting and adhesive failure. In these situations, a combination of capillary and elastic forces drives…
This is the second paper of a series of three investigating, by numerical means, the geometric and mechanical properties of spherical bead packings under isotropic stresses. We study the effects of varying the applied pressure P (from 1 or…
Two series of uniaxial tensile tests are performed on isotactic polypropylene with the strain rates ranging from 5 to 200 mm/min. In the first series, injection-molded specimens are used without thermal pre-treatment, whereas in the other…
Direct modeling of porous materials under shock is a complex issue. We investigate such a system via the newly developed material-point method. The effects of shock strength and porosity size are the main concerns. For the same porosity,…
The packing of elastic bodies has emerged as a paradigm for the study of macroscopic disordered systems. However, progress is hampered by the lack of controlled experiments. Here we consider a model experiment for the isotropic…
We study the transition from cohesive to noncohesive granular states of synthetic rocks under oedometric loading, combining simultaneous measurements of ultrasound velocity and acoustic emissions. Our samples are agglomerates made of glass…
Values of water permeability for cementitious materials reported in the literature show a large scatter. This is partially attributed to the fact that materials used in different studies are different. To eliminate the effects of cements,…
Crystalline materials exhibit an hysteresis behaviour when deformed cyclically. The origins of this tension-compression asymmetry have been fully understood only recently as being caused by an asymmetry in the junction strength and a…
The influence of the microstructural geometry on the behavior of porous media is widely recognized, particularly in geomaterials, but also in biomaterials and engineered materials. Recent advances in imaging techniques, such as X-ray…
Hysteresis in the pressure-saturation relation in unsaturated porous media, which is due to surface tension on the liquid-gas interface, exhibits strong degeneracy in the resulting mass balance equation. Solutions to such degenerate…
In this paper, a modified intermediately homogenized peridynamic (IH-PD) model for analyzing impact failure of wet concrete has been presented under the configuration of ordinary state-based peridynamic theory. The meso-structural…
A mathematical model for an elastoplastic porous continuum subject to large strains in combination with reversible damage (aging), evolving porosity, water and heat transfer is advanced. The inelastic response is modeled within the frame of…
A micromechanical approach is set-up to analyse the increase in elastic stiffness related to development of plastic deformation (the elastoplastic coupling concept) occurring during the compaction of a ceramic powder. Numerical simulations…
Elastic properties and internal states of isotropic sphere packings are studied by numerical simulations. Several numerical protocols to assemble dense configurations are compared. One, which imitates experiments with lubricated contacts,…
Pressurised cylindrical channels made of soft materials are ubiquitous in biological systems, soft robotics, and metamaterial designs. In this paper, we study large deformation of a long, thick-walled, and compressible hyperelastic…
We measure the response of open-cell polyurethane foams filled with a dense suspension of fumed silica particles in polyethylene glycol at compression speeds spanning several orders of magnitude. The gradual compressive stress increase of…
The paper presents a new type of weakly nonlinear two-scale model of controllable periodic porous piezoelectric structures saturated by Newtonian fluids. The flow is propelled by peristaltic deformation of microchannels which is induced due…
The mechanical response, serviceability, and load bearing capacity of materials and structural components can be adversely affected due to external stimuli, which include exposure to a corrosive chemical species, high temperatures,…
We study the effect of spatially-correlated heterogeneity on isothermal drying of porous media. We combine a minimal pore-scale model with microfluidic experiments with the same pore geometry. Our simulated drying behavior compare favorably…
This paper presents a combined numerical-theoretical study of the macroscopic behavior and local field distributions in a special class of two-dimensional periodic composites with viscoplastic phases. The emphasis is on strongly nonlinear…