Related papers: Ultra-Thin Silver Films obtained by Sequential Que…
Large-area transmission dynodes were fabricated by depositing an ultra-thin continuous film on a silicon wafer with a 3-dimensional pattern. After removing the silicon, a corrugated membrane with enhanced mechanical properties was formed.…
The present study reports on the structure formation in thin epitaxial nickel-aluminum films (Ni1-xAlx; Al atomic fraction x up to x=0.24) grown on MgO(001) substrates by magnetron sputtering. Experimental and computational data demonstrate…
Intrigued by the discovery of the long lifetime in the {\alpha}-Ta/Al2O3-based Transmon qubit, researchers recently found {\alpha}-Ta film is a promising platform for fabricating multi-qubits with long coherence time. To meet the…
We report on the synthesis and characterization of nanocrystalline delta-MoN by crystallization of amorphous thin films grown on (100) Si by reactive sputtering at room temperature. Films with chemical composition MoN were grown using a…
Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental…
Thermal stability of silicene and thin silicon films is studied by molecular dynamics using two machine-learning potentials, SNAP and GAP. For SNAP potential, systems ranging from a single silicene layer to films of 36 layers are…
Pr$_{1-x}$Ca$_x$Ba$_2$Cu$_3$O$_{7-\delta}$($x\approx$0.5) thin films have been grown on SrTiO$_3$ and YSZ substrates by the pulsed laser ablation. The substrate temperature dependence of orientation and superconducting poperties were…
MgB2 thick film was synthesized on the stainless steel substrate by the technique of hybrid physical-chemical vapor deposition (HPCVD), using Mg ingot and B2H6 as the raw materials. The film thickness is about 10 microns. The scanning…
An application of the radiolysis method using X-ray synchrotron beam is developed as a novel approach to the synthesis of metal-organic films with controlled shapes and thickness. We demonstrate that a Langmuir monolayer deposited onto a…
Antimony sulfide (Sb$_2$S$_3$), a compound of earth-abundant elements with highly anisotropic, quasi-layered crystal structure, triggered growing interest as a solar absorber in photovoltaics and as a phase change material in memory…
The iron-based superconductor Ba$_{1-x}$K$_x$Fe$_\text{2}$As$_\text{2}$ is emerging as a key material for high magnetic field applications owing to the recent developments in superconducting wires and bulk permanent magnets. Epitaxial thin…
Films of Cu-K-In-Se were co-evaporated at varied K/(K+Cu) compositions and substrate temperatures (with constant (K+Cu)/In ~ 0.85). Increased Na composition on the substrate's surface and decreased growth temperature were both found to…
Thin films of MgB2 superconductor were prepared by three different procedures on sapphire and silicon substrates. Boron thin films, ex-situ annealed in magnesium vapour, resulted in textured polycrystalline films with crystal dimensions…
The present work reports the study of the optimized processing conditions of Bi0.9La0.1Fe0.9Mn0.1O3 thin films, grown by RF sputtering on platinum metalized silicon substrates. The combination of deposition at relatively low substrate…
The in situ annealing conditions of pulsed laser deposited MgB2 films were studied. The precursor films were deposited at 250 C from a stoichiometric MgB2 target in a 120mTorr Ar atmosphere. The films were then in situ annealed at a…
In this study we report on the film growth and characterization of thin (approximately 50 nm thick) Ti-Fe-C films deposited on amorphous quartz. The experimental studies have been complemented by first principles density functional theory…
Superconducting MgB(2) films with Tc = 38.6 K were prepared using a precursor-deposition, ex-situ post-processing approach. Precursor films of boron, ~0.5 micrometer thick, were deposited onto Al(2)O(3) (102) substrates by e-beam…
Electron-doped infinite-layer Sr$_{1-x}$Eu$_{x}$CuO$_{2+y}$ films over a wide doping range have been prepared epitaxially on SrTiO$_3$(001) using reactive molecular beam epitaxy. In-plane transport measurements of the single crystalline…
Tantalum thin films sputtered on unheated silicon substrates are characterized with microwaves at around 10 GHz in a 10 mK environment. We show that the phase of tantalum with a body-centered cubic lattice ($\alpha$-Ta) can be grown…