Related papers: Ultra-Thin Silver Films obtained by Sequential Que…
There is a demand for the manufacture of ultra low-loss metallic films with high-quality single crystals and surface for quantum optics and quantum information processing. Many researches are devoted to alternative materials, but silver is…
MgB2 thin films were cold-grown on sapphire substrates by pulsed laser deposition (PLD), followed by post-annealing in mixed, reducing gas, Mg-rich, Zr gettered, environments. The films had Tcs in the range 29 K to 34 K, Jcs (20K, H=0) in…
Single crystal metal films on insulating substrates are attractive for microelectronics and other applications, but they are difficult to achieve on macroscopic length scales. The conventional approach to obtaining such films is epitaxial…
The use of $\alpha$-tantalum in superconducting circuits has enabled a considerable improvement of the coherence time of transmon qubits. The standard approach to grow $\alpha$-tantalum thin films on silicon involves heating the substrate,…
We report the effect of annealing on the superconductivity of MgB2 thin films as functions of the postannealing temperature in the range from 700 C to 950 C and of the postannealing time in the range from 30 min to 120 min. On annealing at…
We report on the optical characterization of semicontinuous nanostructured silver films exhibiting tunable optical reflectance asymmetries. The films are obtained using a multi-step process, where a nanocrystalline silver film is first…
The growth of high-quality superconducting thin film on silicon substrates is essential for quantum computing, and low signal interconnects with industrial compatibility. Recently, the growth of $\alpha$-Ta (alpha-phase tantalum) thin films…
Chromium selenide thin films were grown epitaxially on Al${_2}$O${_3}$(0001) and Si(111)-(7${\times}$7) substrates using molecular beam epitaxy (MBE). Sharp streaks in reflection high-energy electron diffraction and triangular structures in…
CoFe2O4 thin films (5 nm and 20 nm thick) were grown by oxygen assisted molecular beam epitaxy on Pt(111) at 523~K and subsequently annealed at 773 K in vacuum or oxygen. They were characterized in-situ using Auger Electron Spectroscopy,…
Superconducting properties of thin films can be vastly different from those of bulk materials. Seminal work has shown the critical temperature Tc of elemental superconductors decreases with decreasing film thickness when the normal-state…
Motivated by recent advancements highlighting Ta as a promising material in low-loss superconducting circuits and showing long coherence times in superconducting qubits, we have explored the effect of cryogenic temperatures on the growth of…
Superconducting films of alpha-Ta are promising candidates for the fabrication of advanced superconducting qubits. However, alpha-Ta films suffer from many growth-induced structural inadequacies that negatively affect their performance. We…
Superconducting MgB2 thin films were prepared on 50-micrometer-thick, flexible polyamide Kapton-E foils by vacuum co-deposition of Mg and B precursors with nominal thickness of about 100 nm and a special ex-situ rapid annealing process in…
We have grown NdBa2Cu3O7-d films under silver atomic flux by molecular beam epitaxy, which show a drastic improvement in microstructure and also crystallinity leading to 30 % enhancement in critical current density. The most remarkable…
This paper presents modelled results for optical absorption in ultra-thin films of nickel, gold and silver across the solar spectrum. It is found in the case of nickel there is an optimum thickness for maximum solar absorption around…
We report growth of CuMnSb thin films by molecular beam epitaxy on InAs(001) substrates. The CuMnSb layers are compressively strained ($0.6~\text{%}$) due to lattice mismatch. The thin films have a $\omega$ full width half max of $7.7^{''}$…
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by…
Thin superconducting films of magnesium diboride (MgB2) with Tc \approx 24K were prepared on various oxide substrates by pulsed laser deposition (PLD) followed by an in-situ anneal. A systematic study of the influence of various in-situ…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…
Functional materials with high electrical conductivity and optical transmittance are vital for thermally tunable free-space photonic systems. Conventional transparent conductors such as graphene and indium tin oxide are limited by high…