Related papers: Parametric instabilities in the LCGT arm cavity
Three spacecraft of LISA/TAIJI mission follow their respective geodesic trajectories, and their interferometric arms are unequal and time-varying due to orbital dynamics. Time-delay interferometry (TDI) is proposed to suppress the laser…
The use of fused-silica ribbons as suspensions in gravitational wave interferometers can result in significant improvements in pendulum mode thermal noise. Surface loss sets a lower bound to the level of noise achievable, at what level…
Coating thermal noise in high-reflectivity test-mass mirrors is a major limitation for future gravitational-wave detectors, especially in the 10--300 Hz band. ET-Pathfinder therefore requires mirror coatings that combine very high…
We report on the optical, mechanical and structural characterization of the sputtered coating materials of Advanced LIGO, Advanced Virgo and KAGRA gravitational-waves detectors. We present the latest results of our research program aiming…
We propose a class of displacement- and laser-noise free gravitational-wave-interferometer configurations, which does not sense non-geodesic mirror motions and laser noises, but provides non-vanishing gravitational-wave signal. Our…
Advanced LIGO's sensitivity will be limited by coating noise. Though this noise depends on beam shape, and though nongaussian beams are being seriously considered for advanced LIGO, no published analysis exists to compare the quantitative…
I discuss the robustness of the pumped cavity dynamics against phase diffusion of the laser and conclude that opto-mechanical cooling has extreme sensitivity compared to laser cooling of atoms. Certain proposals of ground state…
The output of gravitational-wave interferometers, such as LIGO and Virgo, can be highly non-stationary. Broadband detector noise can affect the detector sensitivity on the order of tens of seconds. Gravitational-wave transient searches,…
The thermal noise is expected to be one of the main limiting factors on the sensitivity of interferometric gravitational-wave detectors like LIGO and VIRGO. Thermal fluctuations of internal modes of the interferometer's test masses and of…
The results of measurement of optical mirror coating are presented. These results indicate that Standard Quantum Limit of sensitivity can be reached in the second stage of LIGO project if it is limited by thermoelastic noise in the coating…
Advanced LIGO and Advanced Virgo could observe the first lensed gravitational waves in the coming years, while the future Einstein Telescope could observe hundreds of lensed events. Ground-based gravitational-wave detectors can resolve…
Future gravitational wave detectors (GWDs) such as Advanced LIGO upgrades and the Einstein Telescope are planned to operate at cryogenic temperatures using crystalline silicon (cSi) test-mass mirrors at an operation wavelength of 1550 nm.…
We analyze the sensitivity of a network of interferometer gravitational-wave detectors to the gravitational-wave stochastic background, and derive the dependence of this sensitivity on the orientations of the detector arms. We build on and…
Parametric coupling of optical and mechanical degrees of freedom forms the basis of many ultra-sensitive measurements of both force and mechanical displacement. An optical cavity with a mechanically compliant boundary enhances the…
In an experiment to simulate the conditions in high optical power advanced gravitational wave detectors such as Advanced LIGO, we show that strong thermal lenses form in accordance with predictions and that they can be compensated using an…
Extending the sensitivity of terrestrial gravitational-wave detectors below 20 Hz is a long-standing challenge, limited by ground motion and inertial sensing noise. In this letter, we demonstrate ultra-high-vacuum compatible inertial…
We report on the development of a sub-kelvin, single-crystal silicon Fabry-Perot cavity. Operating such a cavity below 1~K should reduce the thermal noise limit of the cavity, and by this way address the current limitations of ultrastable…
The effects of residual amplitude modulation (RAM) in laser interferometers using heterodyne sensing can be substantial and difficult to mitigate. In this work, we analyze the effects of RAM on a complex laser interferometer used for…
AMIGO - The Astrodynamical Middle-frequency Interferometric GW (Gravitation-Wave) Observatory is a first-generation mid-frequency GW mission bridging the sensitivity gap between the high-frequency GW detectors and low-frequency space GW…
The effect of gravitational waves (GWs) has been observed indirectly, by monitoring the change in the orbital frequency of neutron stars in a binary system as they lose energy via gravitational radiation. However, GWs have not yet been…