Related papers: High Quality Factor Silicon Cantilever Driven by P…
The application of piezoelectric materials, such as Lead Zirconate Titanate (ZrxTi1-x) O3 (PZT) is increasing in multiple dynamic industries such as structural health monitoring, wireless energy harvesting devices, measuring blood flow,…
This study investigates a high Q-factor spiral inductor fabricated by the CMOS (complementary metal oxide semiconductor) process and a post-process. The spiral inductor is manufactured on silicon substrate using the 0.35 micrometers CMOS…
$\alpha$-Tantalum ($\alpha$-Ta) is an emerging material for superconducting qubit fabrication due to the low microwave loss of its stable native oxide. However, hydrogen absorption during fabrication, particularly when removing the native…
We present results for a photonic microwave resonator designed and fabricated at 17.4GHz with a record high Quality factor (Q = 26,400) at room temperature over a mode volume smaller than one cubic wavelength. The cavity is uniquely…
The performance of superconducting resonators underpins a wide range of modern quantum technologies, yet their quality factor often deviates at low temperatures from standard Mattis-Bardeen predictions. This discrepancy is often attributed…
We study mechanical dissipation of the fundamental mode of millimeter-sized, high quality-factor ($Q$) metalized silicon nitride membranes at temperatures down to 14 mK using a three-dimensional optomechanical cavity. Below 200 mK, high-$Q$…
High performance lead zirconate titanate (PZT) ceramics with aligned porosity for sensing applications were fabricated by an ice-templating method. To demonstrate the enhanced properties of these materials and their potential for sensor and…
Ultralight mechanical resonators based on low-dimensional materials are well suited as exceptional transducers of minuscule forces or mass changes. However, the low dimensionality also provides a challenge to minimize resistive losses and…
We present the first lithium tantalate (LT) thickness-extensional (TE) mode bulk acoustic resonators designed for piezoelectric power conversion, showcasing a low temperature coefficient of frequency (TCF) of -13.56 ppm/K. These resonators…
Motivated by recent interest in implementing circuit quantum electrodynamics with semiconducting quantum dots, we consider a double quantum dot (DQD) capacitively coupled to a superconducting resonator that is driven by the microwave field…
Mechanical resonators featuring large tensile stress have enabled a range of experiments in quantum optomechanics and novel sensing. Many sensing applications require functionalizing tensioned resonators by appending additional mass to…
A comparative study of unloaded Q-factor measurements of a TE011 mode sapphire dielectric resonator with unloaded Q-factor value of 731,000 at a frequency of 10 GHz and temperature of 65 K using two best Q-factor measurement methods are…
The microfluidic optomechanical resonator (uFOMR) based on a thin-walled glass capillary supports high Q-factor (>1000) mechanical modes in the presence of liquids. In this Letter, the sensitivity of the uFOMR to the surface change is…
We demonstrate that ideal anapole metamaterials have infinite Q-factor. We have designed and fabricated a metamaterial consisting of planar metamolecules which exhibit anapole behavior in the sense that the electric dipole radiation is…
We report a methodology to determine the quality factor ($Q$) in implementations of the so-called dielectric haloscope, a new concept of wavy dark matter detector equipped with a multilayered resonator. An anechoic chamber enables the…
Thermoelectric semiconducting materials are often evaluated by their figure-of-merit, zT. However, by using zT as the metric for showing improvements, it is not immediately clear whether the improvement is from an enhancement of the…
Tantalum (Ta) has recently received considerable attention in manufacturing robust superconducting quantum circuits. Ta offers low microwave loss, high kinetic inductance compared to aluminium (Al) and niobium (Nb), and good compatibility…
We report on the development of Microwave Kinetic Inductance Detectors (MKIDs) using platinum silicide as the sensor material. MKIDs are an emerging superconducting detector technology, capable of measuring the arrival times of single…
We report new experimental results on the search for dark photons based on a near-quantum-limited haloscope equipped with a superconducting cavity. The loaded quality factor of the superconducting cavity is $6\times10^{5}$, so that the…
Superconducting resonators provide a convenient way to measure loss tangents of various dielectrics at low temperature. For the purpose of examining the microscopic loss mechanisms in dielectrics, precise measurements of the internal…