Related papers: Large Area Roller Embossing of Multilayered Cerami…
Multilayer metasurfaces (MLMs) represent a versatile type of three-dimensional optical metamaterials that could enable ultra-thin and multi-functional photonic components. Herein we demonstrate an approach to readily fabricate MLMs…
Metal microstructured optical elements for grating-based X-ray phase-contrast interferometry were fabricated by using an innovative approach of microcasting: hot embossing technology with low melting temperature (280{\deg}C) metal alloy…
A direct electronics printing technique through atomized spraying for patterning room temperature liquid metal droplets on desired substrate surfaces is proposed and experimentally demonstrated for the first time. This method has…
We have developed a modular system for high-resolution microscopy at high hydrostatic pressure. The system consists of a pressurised cell of volume ~100 microlitres, a temperature controlled holder, a ram and a piston. We have made each of…
We succeeded in modifying and controlling the electrical resistance of a standard High Pressure Laminate (HPL) panel through the use of a Gas Electron Multiplier (GEM) foil that has been embedded into the bulk of the HPL plate itself.…
We report the development of broadband solar absorber coatings based on titanium suboxide composite thin films on aluminium substrates. The films are fabricated via scalable DC magnetron sputtering using a Ti target, followed by…
Nickel carbon based multi-layers are a viable route towards future hard X-ray and soft $\gamma$-ray focusing telescopes. Here, we study the Pulsed Laser Deposition growth conditions of such bilayers by Reflective High Energy Electron…
In this paper, we focus on multi-scale modeling and simulation of piezoelectric composite materials. A multi-scale model for piezoelectric composite materials under the framework of Heterogeneous Multi-scale Method(HMM) is proposed. For…
In MEMS technology, most of the devices are fabricated on glass or silicon substrate. However, this research presents a novel manufacture method that is derived from conventional hot embossing technology to fabricate the electrostatic…
Overlay measurements are a critical part of modern semiconductor fabrication, but overlay targets have not scaled down in the way devices have. In this work, we produce overlay targets with very small footprint, consisting of just a few…
We suggest modified bi-level approach for finding the best stacking sequence of laminated composite structures subject to mechanical, blending and manufacturing constraints. We propose to use both the number of plies laid up at predefined…
Grayscale lithography allows the creation of micrometer-scale features with spatially-controlled height in a process that is fully compatible with standard lithography. Here, solid immersion lenses are demonstrated in silicon carbide using…
Aluminum alloys are increasingly utilized as lightweight materials in the automobile industry due to their superior capability in withstanding high mechanical loads. A significant challenge impeding the large-scale use of these alloys in…
Applying micro-patterns to surfaces has been shown to impart useful physical properties such as drag reduction and hydrophobicity. However, current manufacturing techniques cannot produce micro-patterned surfaces at scale due to high-cost…
Inorganic/inorganic composites are found in multiple applications crucial for the energy transition, from nuclear reactor to energy storage devices. Their microstructures dictate a number of properties, such as mass transport or fracture…
This paper first reviews non-traditional heat exchanger geometry, laser welding, practical issues with microchannel heat exchangers, and high effectiveness heat exchangers. Existing microchannel heat exchangers have low material costs, but…
This paper explores the mechanical behaviour of the composite materials used in modern lithium-ion battery electrodes. These contain relatively high modulus active particle inclusions within a two-component matrix of liquid electrolyte…
A variety of tools can be used for spreading metal, ceramic, and polymer feedstocks in powder bed additive manufacturing methods. Rollers are often employed when spreading powders with limited flowability, as arises in powders comprising…
Multifunctional polymer composites with anisotropic properties are attracting interests as they fulfil the growing demand of multitasking materials. In this work, anisotropic polymer composites are fabricated by combining the layer-by-layer…
Due to their exceptional mechanical and chemical properties and their natural abundance, cellulose nanocrystals (CNCs) are promising building blocks of sustainable polymer composites. However, the rapid gelation of CNC dispersions has…