Related papers: Design Methodology and Manufacture of a Microinduc…
The demand on mobile electronics to continue to shrink in size while increase in efficiency drives the demand on the internal passive components to do the same. Power amplifiers require inductors with small form factors, high quality…
Magnetic materials, both hard and soft, are used extensively in several components of particle accelerators. Magnetically soft iron-nickel alloys are used as shields for the vacuum chambers of accelerator injection and extraction septa;…
Most conventional magnetic materials used in the electronic devices are ferrites, which are composed of micrometer-size grains. But ferrites have small saturation magnetization, therefore the performance at GHz frequencies is rather poor.…
The progress in the semiconductor industry has resulted in great demand for high-frequency magnetic materials applicable in microfabricated inductor cores. Nanocomposite materials, containing magnetic nanoparticles in a non-conducting…
Multiple applications of relevance in photonics, such as spectrally efficient coherent communications, microwave synthesis or the calibration of astronomical spectrographs, would benefit from soliton microcombs operating at repetition rates…
Precision AC resonant capacitance bridges, with a planar printed circuit board transformer using an ungapped MnZn ferrite core, have shown excellent noise performance in high-precision measurements. As many applications use an ensemble of…
We analyze the design of a potential replacement technology for the commercial ferrite circulators that are ubiquitous in contemporary quantum superconducting microwave experiments. The lossless, lumped element design is capable of being…
Large-scale arrays of Microwave Kinetic Inductance Detectors (MKIDs) are attractive candidates for use in imaging instruments for next generation submillimeter-wave telescopes such as CCAT. We have designed and fabricated tightly packed…
In this paper, secondary ferrite cores and resonant structures have been used for field enhancement. The tissue was placed between the double square source coil and the secondary ferrite core. Resonant coils were added which aided in…
We have fabricated 2024 pixel microwave kinetic inductance detector (MKID) arrays in the ultraviolet/optical/near-IR (UVOIR) regime that are currently in use in astronomical instruments. In order to make MKIDs desirable for novel…
The separation and optimization of noise components is critical to microwave-kinetic inductance detector (MKID) development. We analyze the effect of several changes to the lumped-element inductor and interdigitated capacitor geometry on…
Investigations into the microwave surface impedance of superconducting resonators have led to the development of single photon counters that rely on kinetic inductance for their operation. While concurrent progress in additive…
This paper proposes a new coil configuration that uses solenoid ferrites on the receiver side instead of planar ferrite coils that are employed in existing wireless charging systems.The solenoid ferrites are used in the drone legs to help…
Compared to traditional superhard materials with high electron density and strong covalent bonds, alloy materials mainly composed of metallic bonding structures typically have great toughness and lower hardness. Breaking through the limits…
On-silicon inductors using a bulk 0.18 {\mu}m CMOS process have been designed. By shunting different metal layers in parallel, inductor values and quality factors were simulated. Selected inductors were then employed in two open-loop buck…
Soliton microcombs generated in nonlinear microresonators facilitate the photonic integration of timing, frequency synthesis, and astronomical calibration functionalities. For these applications, low-repetition-rate soliton microcombs are…
We demonstrate improvements to the cooling power of broad bandwidth (10 GHz) microwave attenuators designed for operation at temperatures below 100 mK. By interleaving 9-$\mu$m thick conducting copper heatsinks in between 10-$\mu$m long,…
We demonstrate integrating a high quality factor lithium niobate microdisk resonator with a free-standing membrane waveguide. Our technique is based on femtosecond laser direct writing which produces the pre-structure, followed by focused…
Future measurements of the millimeter-wavelength sky require a low-loss superconducting microstrip, typically made from niobium and silicon-nitride, coupling the antenna to detectors. We propose a simple device for characterizing these…
Inductance of superconducting thin-film inductors and structures with linewidth down to 250 nm has been experimentally evaluated. The inductors include various striplines and microstrips, their 90-degree bends and meanders, interlayer vias,…