Related papers: Porous Alumina Based Capacitive MEMS RH Sensor
Recent advancements in soft robots, human-machine interfaces, and wearable electronics have led to an increased demand for high-performance soft tactile sensors. Tomographic tactile sensor based on resistive coupling is a novel contact…
Microwave energy can be advantageously used for materials processing as it provides high heating rates and homogeneous temperature field distribution. These features are partly due to the large microwave penetration depth into dielectric…
An environmentally stable mesoscopic thin film of Au of certain thickness has been deposited thermally on top of a Ag+ implanted oxide substrate to develop a close to room temperature superconductor. This thin film has been deposited in two…
We present proof-of-operation for a new method of electron thermometry using microwave impedance of a hafnium micro-absorber. The new method leads to an ultimate THz-range detector suitable for microwave readout and frequency division…
Inspired by the classic theory, we suggest that the performance of a D-shaped fiber optical surface plasmon resonance (SPR) sensor can be improved by manipulating the fiber core mode. To demonstrate this, we propose a novel fiber SPR sensor…
Deep energy renovation of building stock came more into focus in the European Union due to energy efficiency related directives. Many buildings that must undergo deep energy renovation are old and may lack design/renovation documentation,…
Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively-pumped to ultra-high-vacuum (UHV) to…
Graphene oxide relative dielectric permittivity, both its real and imaginary parts, have been measured under various humidity conditions at GHz. It is demonstrated that the relative dielectric permittivity increases with increasing humidity…
A maskless post-processing technique for CMOS chips is developed that enables the fabrication of RF MEMS parallel-plate capacitors with a high quality factor and a very compact size. Simulations and measured results are presented for…
Effective water management is essential for the optimal performance of PEM fuel cells. We have developed an impedance model for liquid water transport through the membrane and coupled it with the two-phase model for cathode side impedance.…
Surface Plasmon Resonance sensors are a well-established class of sensors which includes a very large variety of materials and detection schemes. However, the development of portable devices is still challenging as due to the intrinsic…
Wearable biosensors increasingly require continuous and battery-free power sources, but conventional skin-mounted thermoelectric generators are limited by the small temperature differences available in real environments. This work…
This paper presents the development of instrumentation for the measurement of high-temperature thermal conductivity of bulk and coatings using a modulated photothermal radiometry (MPR) method, where a sample is heated by an…
In this study, novel flexible micro-scale humidity sensors were directly fabricated in graphene oxide (GO) and polyimide (PI) using ion beam writing without any further modifications, and then successfully tested in an atmospheric chamber.…
We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2…
Next-generation heat-assisted magnetic recording (HAMR) relies on fast, localized heating of the magnetic medium during the write process. Au plasmonic near-field transducers are an attractive solution to this challenge, but increased…
Common thermal anemometers (hot-wire, hot-film, or similar) are based on the thermal equilibrium between the electrical power heating the sensor and the convection of the ambient medium cooling the sensor. The response times of such…
Biosensors are an essential tool for medical diagnostics, environmental monitoring and food safety. Typically, biosensors are designed to detect specific analytes through functionalization with the appropriate capture agents. However, the…
In this work, a metamaterial selective solar absorber made of nanostructured titanium gratings deposited on an ultrathin MgF2 spacer and a tungsten ground film is proposed and experimentally demonstrated. Normal absorptance of the…
Understanding the microscopic thermal effects of the hydrogel is important for its application in diverse fields, including thermal-related studies in tissue engineering and thermal management for flexible electronic devices. In recent…