Related papers: Structural, magnetic and mechanical properties of …

Using two different experimental techniques, namely, chemical vapor deposition (CVD) and physical vapor deposition (PVD), we deposited a Lead sulphide (PbS) thin films with a very small lifetime. We investigated the morphology of the…

We report the growth of high-quality c-axis-oriented epitaxial MgB2 thin films by using a pulsed laser deposition technique. The thin films grown on (1`1 0 2) Al2O3 substrates show a Tc of 39 K. The critical current density in zero field is…

Optimized DC magnetron sputtering system for the deposition of transparent conductive oxides (TCOs), such indium tin oxide (ITO) on glass substrate has been applied in order to achieve low-emitting (low-e) transparent coatings. To obtain…

We have studied the properties of relatively thick (about 120 nm) magnetic composite films grown by pulsed laser deposition method using (GaSb)$_{0.59}$(MnSb)$_{0.41}$ eutectic compound as a target for sputtering. For the studied films we…

Thin films of Nd$_{0.5}$Ca$_{0.5}$MnO$_{3}$ manganites with colossal magnetoresistance (CMR) properties have been synthesized by the Pulsed Laser Deposition technique on (100)-SrTiO$_{3}$. The lattice parameters of these manganites and…

The structural and magnetic properties of Mn5Ge3Cx films prepared at elevated substrate temperatures TS are investigated. In particular, films with x >= 0.5 and TS = 680 K exhibit a strongly enhanced Curie temperature TC = 440 K compared to…

Sputter thin film deposition after photolithography often produces unwanted spikes along the side edges. These spikes are a significant issue for the development of magnetic tunnel junction (MTJ)-based memory and molecular spintronics…

A series of c-axis oriented electron-doped high-Tc superconducting La(2-x)CexCuO4 thin films, from heavily underdoped x=0.06 to heavily overdoped x=0.19, have been synthesized by dc magnetron sputtering technique on (100) SrTiO3 substrates.…

We report a new in-situ reactive deposition thin film growth technique for the production of MgB2 thin films which offers several advantages over all existing methods and is the first deposition method to enable the production of…

Superconducting thin films have been prepared on Si-substrates, using pulsed laser deposition from a target composed of a mixture of Mg and MgB2 powders. The films were deposited at room temperature and post-annealed at 600 degrees C. The…

We report the deposition of thin Co$_2$FeSi films by RF magnetron sputtering. Epitaxial (100)-oriented and L2$_1$ ordered growth is observed for films grown on MgO(100) substrates. (110)-oriented films on Al$_2$O$_3$(110) show several…

In order to combine silicon technology with the functionality of magnetic systems, a number of ferromagnetic (FM) materials have been suggested for the fabrication of metal/semiconductor heterojunctions. In this work, we present a…

Plasma enhanced atomic layer deposition was used to deposit thin films of Ga2O3 on to c-plane sapphire substrates using triethylgallium and O2 plasma. The influence of substrate temperature and plasma processing parameters on the resultant…

We study how the substrate temperature influences the structural properties of carbon films deposited by PVD (physical vapor deposition) techniques. We adapted a heating system inside the deposition chamber, with temperatures up to…

Lowering the operating temperature of Solid Oxide Fuel Cells (SOFCs) is essential for improving durability and enabling large scale commercialization. Mixed ionic-electronic conductors (MIECs) of the Ruddlesden-Popper family, such as…

The effect of 3-dimensional strain state on the magnetocaloric properties of epitaxial La0.8Ca0.2MnO3 (LCMO) thin films grown on two types of substrates, SrTiO3 (001) (STO) and LaAlO3 (001) (LAO) has been studied as a function of film…

Highly oriented polycrystalline SSMO thin films deposited on single crystal substrates by ultrasonic nebulized spray pyrolysis have been studied. The film on LAO is under compressive strain while LSAT and STO are under tensile strain. The…

We introduce a simple method of an MgB2 film preparation using sequential electron-beam evaporation of B-Mg two-layer (followed by in-situ annealing) on the NbN buffered Si(100) substrate. The Transmission Electron Microscopy analyses…

We have fabricated high-quality FeSe1-x superconducting films with a bulk Tc of 11-12 K on different substrates, Al2O3(0001), SrTiO3(100), MgO(100), and LaAlO3(100), by using a pulsed laser deposition technique. All the films were grown at…

Two-dimensional magnetic materials (2D-MM) are an exciting playground for fundamental research, and for spintronics and quantum sensing. However, their large-grain large-area synthesis using scalable vapour deposition methods is still an…