Related papers: The influence of cracks in rotating shafts
Vibrations of the Jeffcott rotor are modelled by a three degree of freedom system including coupling between lateral and torsional modes. The crack in a rotating shaft of the rotor is introduced via time dependent stiffness with off…
Turbo-generators shafts are manufactured through the extrusion process. This results in the formation of weak planes along the extrusion process. It has been observed that large longitudinal cracks often form in these shafts before any…
Vibration peaks occurring at rational fractions of the fundamental rotating critical speed, here named Local Resonances, facilitate cracked shaft detection during machine shut-down. A modified Jeffcott-rotor on journal bearings accounting…
The intakes of air-breathing high-speed flying vehicles produce a large share of the thrust propulsion. Furthermore, the propulsion performance of these engines increases when the single-ramp intake is replaced with a multiple-ramps intake.…
An innovative technique, called conversion, is introduced to model circumferential cracks in thin cylindrical shells. The semi-analytical finite element method is applied to investigate the modal deformation of the cylinder. An element…
We consider the impact of a ring crack within a rotating hollow cylinder of fixed height under axisymmetric (torsion) loading. The form of the displacement is obtained from the equation of motion using the Fourier sin transform. The…
The dynamics of nonlocally coupled dissipative kicked rotors is rich and complex. In this study, we consider a network of rotors where each interacts equally with a certain range of its neighbors. We focus on the influence of the coupling…
One of the methods to find the natural frequencies of rotating systems is the application of the transfer matrix method. In this method the rotor is modeled as several elements along the shaft which have their own mass and moment of…
In this article, the model presented by Shen and Pierre to investigate the transverse vibration behavior of a simply supported beam has been revised. This is done by applying more realistic assumptions. The crack is modeled as a continuous…
Multifractal analysis has been used to diagnoze cracked and healthy rotors. Is has been shown that the complexity and regularity criteria of the dynamical systems defined by the multiple scaling of the time series can indicate the damages…
This Paper outlines study behaviour of rotating shaft with high speed under thermal effects. The method of obtaining the frequency response functions of a rotor system with study whirl effect in this revision the raw data obtained from the…
We investigate experimentally and theoretically the dynamics of a crack front during the micro-instabilities taking place in heterogeneous materials between two successive equilibrium positions. We focus specifically on the spatio-temporal…
In the context of elastic wave propagation in damaged solids, an analytical approach for scattering of antiplane waves by two-dimensional periodic arrays of cracks is developed. Before considering the study of arrays of cracks, the…
Interactional aerodynamics of a quadcopter in hover is numerically investigated in this study. The main objective is to understand major flow structures associated with unsteady airloads on multirotor aircraft. The overset mesh approach is…
The paper presents a model of a dynamic crack with a wavy surface. So far, theoretical analysis of crack front waves has been performed only for in-plane perturbations of the crack front. In the present paper, generalisation is given to a…
By integrating a set of model equations for Josephson ladder subjected to a uniform transverse bias current we have found almost all of the kinds of breathers described in recent experiments, and closely reproduced their voltage-current…
The effects of a weak microwave field in the magnetization dynamics driven by spin-transfer-torque in spin-valves with perpendicular materials have been systematically studied by means of full micromagnetic simulations. In the system we…
The dynamics of a single crack moving through a heterogeneous medium is studied in the quasi-static approximation. Equations of motion for the crack front are formulated and the resulting scaling behaviour analyzed. In a model scalar system…
A perturbative analysis is used to investigate the effect of rotation on the instability of a steady accretion shock (SASI) in a simple toy-model, in view of better understanding supernova explosions in which the collapsing core contains…
Crack fronts deform due to heterogeneities, and inspecting these deformations can reveal local variations of material properties, and help predict out of plane damage. Current models neglect the influence of a finite dissipation…