Related papers: Cavity BPM System Tests for the ILC Spectrometer
Initial test results of an L-band multi-beam klystron with parameters relevant for ILC are presented. The chief distinction of this tube from MBKs already developed for ILC is its low operating voltage of 60 kV, a virtue that implies…
The CMS beam and radiation monitoring subsystem BCM1F (Fast Beam Condition Monitor) consists of 8 individual diamond sensors situated around the beam pipe within the pixel detector volume, for the purpose of fast bunch-by-bunch monitoring…
We design new continuous phase modulation (CPM) formats which are based on the combination of a proper precoder with binary input and a ternary CPM. The proposed precoder constrains the signal phase evolution in order to increase the…
The paper proposes a method of finding the beam loss locations in a linac. If the beam is scraped at an aperture limitation, moving its centroid with two dipole correctors located upstream and oscillating in sync produces a line at the…
Evaluation of different signals in a cavity BPM
A compact resonance ionization mass spectrometer is developed using two laser diodes and a quadrupole mass spectrometer to perform trace element analysis of potassium. With the help of a narrow linewidth of the laser diode, the isotope…
The fast ion instability is simulated in different gas pressures and fill patterns for the damping ring of the International Linear Collider (ILC) and PETRA III respectively. Beam size variation due to beta function and dispersion function…
In the isochronous mass spectrometry (IMS) performed at storage rings, masses of short-lived nuclides are determined through precision measurements of their mean revolution times. However, the distribution of revolution times could be…
Dual comb spectroscopy (DCS) is a broadband technique offering high resolution and fast data acquisition. We describe a hybrid dual comb spectrometer comprising a broadband commercial fiber laser system offering a wide range of sample…
This paper addresses the performance of bit-interleaved coded multiple beamforming (BICMB) [1], [2] with imperfect knowledge of beamforming vectors. Most studies for limited-rate channel state information at the transmitter (CSIT) assume…
The increasing number of inverter based resources (IBRs) connected to modern power systems necessitate accurate modeling of IBRs in stability studies. Measurement-based modeling approaches can create an impedance/admittance model of IBRs to…
A large volume Time Projection Chamber (TPC) has been proposed as main tracking device at the International Linear Collider (ILC). Gas electron multipliers (GEMs) are studied as potential replacement of the conventional wire based gas…
Spatially distributed cavity (SDC) lasers are a promising technology for simultaneous light information and power transfer (SLIPT), offering benefits such as increased mobility and intrinsic safety, which are advantageous for various…
The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about…
A cylindrical GEM tracker is under construction in order to replace and improve the inner tracking system of the BESIII experiment. Tests with planar chamber prototypes were carried out on the H4 beam line of SPS (CERN) with muons of 150…
The energy of a bunched non-relativistic ion beam can be deduced from measuring the beam phases in neighbouring Beam Position Monitors (BPMs). This report discusses implementation of such a procedure at the PIP-II H- linac being constructed…
Electromagnetic modeling with MAFIA of the combined beam position-phase monitors (BPPMs) for the Spallation Neutron Source (SNS) linac has been performed. Time-domain 3-D simulations are used to compute the signal amplitudes and phases on…
This paper describes beam energy online measurement of BEPCII linac, presents the calculation formula and some of the results. The method mentioned here measures the beam energy by acquiring beam positions in the horizontal direction with…
We demonstrate a powerful tool for high-resolution mid-IR spectroscopy and frequency metrology with quantum cascade lasers (QCLs). We have implemented frequency stabilization of a QCL to an ultra-low expansion (ULE) reference cavity, via…
The Internal Linear Combination (ILC) is widely used to extract the cosmic microwave background (CMB) signal from multi-frequency observation maps, especially for Satellite experiments with quasi-full sky coverage. We extend ILC method to…