Related papers: Effects of a tungsten addition on the morphologica…
Cobalt-based alloys with {\gamma}/{\gamma}' microstructures have the potential to become the next generation of superalloys, but alloy compositions and processing steps must be optimized to improve coarsening, creep, and rafting behavior.…
The details of phase separation of a Ni-6.5Al-9.9Mo aged at 978 K for aging times ranging from 0.125 to 1024 h are investigated by atom-probe tomography and lattice-kinetic Monte Carlo (LKMC) simulations. On the basis of the temporal…
A novel y-y'-y" dual-superlattice superalloy, with promising mechanical properties up to elevated temperatures was recently reported. The present work employs state of the art chemical and spatial characterization techniques to study the…
Nucleation and growth of Ti$_3$Al \textalpha{}$_2$ ordered domains in \textalpha{}-Ti--Al--X alloys were characterised using a combination of transmission electron microscopy, atom probe tomography and small angle X-ray scattering. Model…
In this study, the effect of rhenium (Re) addition on microstructural evolution of a new low-density Co-Ni-Al-Mo-Nb based superalloy is presented. Addition of Re significantly influences the {\gamma}' precipitate morphology, the…
This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron…
The temporal evolution of ordered gamma-prime(L12)-precipitates and the compositional trajectories during phase-separation of the gamma(face-centered-cubic(f.c.c.)) and gamma-prime(L12)-phases are studied in a…
Ni-W based medium heavy alloys offer a promising pathway to bridge the density-strength gap between tungsten heavy alloys and ultrahigh-strength steels. In this study, the effects of W concentration on short-range order (SRO), deformation…
The microstructural stability and mechanical properties of superalloys at high temperatures are significantly influenced by the composition and nature of the solutes they contain. Most of the alloys with high solvus temperature have higher…
This work demonstrates the development of a strong and ductile medium entropy alloy by employing conventional alloying and thermomechanical processing to induce partial recrystallization (PR) and precipitation strengthening in the…
The temporal evolution of ordered gamma prime (L12)-precipitates precipitating in a disordered gamma(f.c.c.) matrix is studied in extensive detail for a Ni-12.5 Al at.% alloy aged at 823 K (550 oC), for times ranging from 0.08 to 4096 h.…
The kinetic pathways resulting from the formation of coherent L12-ordered y'-precipitates in the g-matrix (f.c.c.) of Ni-7.5 Al-8.5 Cr at.% and Ni-5.2 Al-14.2 Cr at.% alloys, aged at 873 K, are investigated by atom-probe tomography (APT)…
Precipitation hardening, which relies on a high density of intermetallic precipitates, is a commonly utilized technique for strengthening structural alloys. Structural alloys are commonly strengthened through a high density of small size…
One of the main material properties altered by rare earth additions in magnesium alloys is texture, which can be specifically adjusted to enhance ductility and formability. The current study aims at illuminating the texture selection…
We derive a semi-analytical extension of the spherical collapse model of structure formation that takes account of the effects of deviations from spherical symmetry and shell crossing which are important in the non-linear regime. Our model…
A large body of literature within the additive manufacturing (AM) community has focused on successfully creating stable tungsten (W) microstructures due to significant interest in its application for extreme environments. However,…
The secondary phase, such as Ni$_3$Al-based $L1_2$ $\gamma^\prime$, is crucially important for precipitation strengthening of superalloys. Composition-structure-property relations provide useful insights for guided alloy design. Here we use…
Two different precipitate hardening aluminium alloys processed by friction stir welding were investigated. The microstructure and the hardness of the as delivered materials were compared to that of the weld nugget. Transmission electron…
Using \textit{ab initio} calculation, we investigate systematically the structural and electronic properties of Ni$_{2}$Nb$_{1+x}$Sn$_{1-x}$ ($x$ = 0, 0.25, 0.50). Here, projector augmented wave approach (PAW) implemented in the Vienna…
Formation of large volume fractions of Mn-Ni-Si precipitates (MNSPs) causes excess irradiation embrittlement of reactor pressure vessel (RPV) steels at high, extended-life fluences. Thus, a new and unique, semi-empirical cluster dynamics…