Related papers: Harnessing bifurcations in tapping-mode atomic for…
We investigate nano scanning in tapping mode atomic force microscopy (AFM) under quality (Q) control via numerical simulations performed in SIMULINK. We focus on the simulation of whole scan process rather than the simulation of cantilever…
We report on progress in developing compact sensors for atomic force microscopy (AFM), in which the mechanical transducer is integrated with near-field optical readout on a single chip. The motion of a nanoscale, doubly-clamped cantilever…
We experimentally surpass the 3dB limit to steady state parametric squeezing of a mechanical oscillator. The localization of a AFM cantilever, achieved by optimal estimation, is enhanced by up to 6.2 dB in one position quadrature when a…
Dynamic interactions between two oscillating micromechanical cantilevers are studied. In the experiment, the tip of a high-frequency cantilever is positioned near the surface of a second low-frequency cantilever. Due to the highly nonlinear…
Intermodulation atomic force microscopy (IMAFM) is a dynamic mode of atomic force microscopy (AFM) with two-tone excitation. The oscillating AFM cantilever in close proximity to a surface experiences the nonlinear tip-sample force which…
A new approach, called Adaptive Q-control, for tapping-mode Atomic Force Microscopy (AFM) is introduced and implemented on a home-made AFM set-up utilizing a Laser Doppler Vibrometer (LDV) and a piezo-actuated bimorph probe. In the standard…
A spreadsheet algorithm is given for the atomic force microscope that accounts for non-linear behavior in the deflection of the cantilever and in the photo-diode response. In addition, the data analysis algorithm takes into account…
The electric forces acting on an atomic force microscope tip in solution have been measured using a microelectrochemical cell formed by two periodically biased electrodes. The forces were measured as a function of lift height and bias…
We propose a compact atom interferometer to measure homogeneous constant forces guiding the arms via shortcuts to adiabatic paths. For a given sensitivity, which only depends on the space-time area of the guiding paths, the cycle time can…
Atomic force microscope (AFM) users often calibrate the spring constants of cantilevers using functionality built into individual instruments. This is performed without reference to a global standard, which hinders robust comparison of…
We describe a transducer for low-temperature atomic force microscopy based on electromechanical coupling due to a strain-dependent kinetic inductance of a superconducting nanowire. The force sensor is a bending triangular plate (cantilever)…
Forces acting between an Atomic Force Microscope (AFM) tip and sample are three dimensional. Despite this, most AFM force measurements are confined to one or two dimensions. Extending AFM force measurements into three dimensions has…
The activated torsion oscillation magnetometer exploits the mechanical resonance of a cantilever beam, driven by the torque exerted on the sample by an ac field applied perpendicularly to the film plane. We describe a model for the…
We introduce wavefront shaping as a tool for optimizing the sensitivity in nano-optomechanical measurement schemes. We perform multimode output analysis of an optomechanical system consisting of a focused laser beam coupled to the…
We use the principles of cavity optomechanics to design a resonant mechanical force sensor for atomic force microscopy. The sensor is based on a type of electromechanical coupling, dual to traditional capacitive coupling, whereby the motion…
Higher harmonic modes in nanoscale silicon cantilevers and microscale quartz tuning forks are detected and characterized using a custom scanning optical homodyne interferometer. Capable of both mass and force sensing, these resonators…
In a stack of atomically-thin Van der Waals layers, introducing interlayer twist creates a moir\'e superlattice whose period is a function of twist angle. Changes in that twist angle of even hundredths of a degree can dramatically transform…
Using electrostatic coupling between an AFM tip and a metallic surface as a test interaction, we here present the measurement of the force between the tip and the surface, together with the measurement of the interaction stiffness and the…
A force measurement technique has been developed that utilizes a clamped fiber optic element both as a cantilever and as a highly sensitive probe of the static and dynamic displacement of a sample that is mounted near its free end. Light…
Mechanical properties of biological samples have been imaged with a \textit{Force Feedback Microscope}. Force, force gradient and dissipation are measured simultaneously and quantitatively, merely knowing the AFM cantilever spring constant.…