Related papers: Investigation of Bioglass-Electrode Interfaces aft…
Electro-thermal poling experiments were carried out on a bioactive glass, and the kinetics of the Na+ ion depletion layer formation under the anode was studied in-situ by means of ac impedance spectroscopy. One important finding is a linear…
We study the electrode polarization behaviour of different Na-Ca-phosphosilicate glasses by measuring the differential capacitance between blocking Pt electrodes. At low applied dc bias voltages, we detect a linear capacitance regime with…
Solid-state electrolytes, by enabling lithium metal anodes, may significantly increase the energy density of current lithium-ion batteries. However, similar to their liquid counterparts, these hard and stiff electrolytes can still be…
This paper presents results for systems formed in a solid glassy state after nanocrystallization process above the glass temperature. We analyze electric conductivity and relaxation processes after such treatment under high temperature (HT)…
Strongly confined NaVO$^+$ segregation and its thermo-responsive functionality at the interface between simple sputter-deposited amorphous vanadium oxide thin films and soda-lime glass was substantiated in the present study by in-situ…
Using molecular dynamics simulation, we study dipolar glass in crystals composed of slightly spheroidal, polar particles and spherical, apolar impurities between metal walls. We present physical pictures of ferroelectric glass, which have…
A better understanding of interfacial mechanisms is needed to improve the performances of electrochemical devices. Yet, simulating an electrode surface at fixed electrolyte composition remains a challenge. Here we apply a finite electric…
The charge profile of thermally poled electrets has been studied using two different methods, laser induced pressure pulse (LIPP) and pulsed electroacoustic (PEA), to gain insight into the mechanisms that are activated and assess which is…
Many key industrial processes, from electricity production, conversion and storage to electrocatalysis or electrochemistry in general, rely on physical mechanisms occurring at the interface between a metallic electrode and an electrolyte…
We introduce electrically-poled small molecule assemblies that can serve as the active electro-optic material in nano-scale guided-wave circuits such as those of the silicon photonics platform. These monolithic organic materials can be…
Zeta potentials of several polar protic (water, ethylene glycol, formamide) as well as polar aprotic (dimethyl sulfoxide) liquids were measured in contact with three non-polar surfaces using closed-cell electro-osmosis. The test surfaces…
Electrochemical etching of silicon in hydrofluoride containing electrolytes leads to pore formation for low and to electropolishing for high applied current. The transition between pore formation and polishing is accompanied by a change of…
The ability to induce regions of high and low ionic concentration adjacent to a permeselective membrane or nanochannel subject to an externally applied electric field (a phenomenon termed concentration-polarization) has been used for a…
Study of the dephasing in electronic systems is not only important for probing the nature of their ground states, but also crucial to harnessing the quantum coherence for information processing. In contrast to well-studied conventional…
We have compared measurements of a set of polyethylene terephthalate (PET) electret samples by means of pulsed electroacoustic method (PEA) and thermally stimulated depolarization current (TSDC) techniques. Experimental parameters such as…
Leveraging thermal losses as a useful consequence of surface plasmons in metal nanostructures has gained traction in recent years. This thermalization of hot electrons also induces a resistance change to an applied bias current, which we…
We report on the development of some process capabilities for a polymer-based, multi-layer microelectrofluidic platform, namely: the hot embossing process, metallization on polymer and polymer bonding. Hot embossing experiments were…
The influence has been studied of the ionization laser polarization on the effective temperature of an ultracold electron source, which is based on near-threshold photoionization. This source is capable of producing both high-intensity and…
Recent studies have pointed the importance of polyelectrolyte assembly in the elaboration of innovative nanomaterials. Beyond their structures, many important questions on the thermodynamics of association remain to be answered. Here, we…
The glass transition in amorphous poly(ethylene terephthalate) is studied by thermally stimulated depolarization currents (TSDC) and differential scanning calorimetry (DSC). The ability of TSDC to decompose a distributed relaxation, as the…