Related papers: ac Losses in a Finite Z Stack Using an Anisotropic…
In this paper I discuss analytic and numerical calculations of the magnetic-field and sheet-current distributions in superconducting strips of width 2a and arbitrary thickness 2b at the center when the cross section is an ellipse, a…
The current transport in polycrystalline MgB$_2$ is strongly influenced by the intrinsic anisotropy of this superconductor. Untextured bulks and wires are macroscopically isotropic, but the grains retain their anisotropic properties and the…
In this paper we derive the integral equations for radially and polygonally arranged high-temperature superconductor thin tapes and we solve them by finite-element method. The superconductor is modeled with a non-linear power law, which…
Study of AC losses in superconducting wires and tapes is usually restricted by consideration of applied sinusoidal currents and/or magnetic fields. However, currents in electric power systems contain a wide variety of harmonics. The…
The case of ac transport at in-phase alternating applied magnetic fields for a superconducting rectangular strip with finite thickness has been investigated. The applied magnetic field is considered perpendicular to the current flow. We…
We report a study on the anisotropy of superconducting properties in single crystalline Ca10(Pt4-{\delta}As8)(Fe1.79Pt0.21As2)5 with Tc ~13.6 K. Under a field of 5 Oe, the sample reaches fully-diamagnetic state at ~10 K for H//c, and ~8 K…
The estimation of the critical current ($I_c$) and AC losses of high-temperature superconductor (HTS) devices through modeling and simulation requires the knowledge of the critical current density ($J_c$) of the superconducting material.…
Measurements of AC losses in a HTS-tape placed in between of two bulk magnetic shields of high permeability were performed by applying calorimetric techniques for various asymmetrical shielding arrangements. The experiment was supported by…
The problem of calculating the ac losses in a superconductor strip with a transport current placed inside superconducting environments is studied analytically in the frame of the critical state model. Exact results obtained by the method of…
For an accurate estimation of the AC losses of superconducting triaxial cables, we present a 2D model capable to provide a global assessment of multi-layer triaxial cables, validated against the AC-losses on single-phase cables provided by…
Numerical models for computing the effective critical current of devices made of HTS tapes require the knowledge of the Jc(B,theta) dependence, i.e. of the way the critical current density Jc depends on the magnetic flux density B and its…
A thin flat superconductor of arbitrary shape and with arbitrary in-plane and out-of-plane anisotropy of flux-line pinning is considered, in an external magnetic field normal to its plane. It is shown that the general three-dimensional…
Study of AC losses in superconducting wires and tapes is usually restricted by consideration of applied sinusoidal currents and/or magnetic fields. However, currents in electric power systems contain a wide variety of harmonics. The…
Performing the first-principles calculations, we investigate the anisotropy in the superconducting state of iron-based superconductors to gain an insight into their potential applications. The anisotropy ratio $\gamma_\lambda$ of the c-axis…
A model for highly non-linear transport in heterogeneous media consisting of anisotropic particles with a preferred orientation is proposed and applied to the current transport in weakly textured magnesium diboride, MgB2. It essentially…
We Study in this paper the scaling and statistical properties of the $ac$ conductivity of thin metal-dielectric films in different regions of the loss in the metallic components and particularly in the limit of vanishing loss. We model the…
The c-axis textured Sr1-xKxFe2As2 tapes produced by cold rolling and post-annealing, could carry a high super-current over 2*104 A/cm2. However, the magnitude is far from its maximum, because of the current obstacles associated with various…
We theoretically investigate the response of a superconducting film to line currents flowing in linear wires placed above the film, and we present analytic expressions for the magnetic-field and current distributions based on the critical…
(Ba,K)Fe2As2 superconducting wires and tapes are fabricated by using hot isostatic pressing (HIP) technique, and their superconducting properties are studied. In the HIP round wire, transport critical current density (Jc) at 4.2 K has…
The ac losses in a silver-gold alloy sheathed Bi-2223 tape were measured by the null calorimetric method while a dc current was superimposed onto the ac current. As expected through computer simulations, a Clem valley was observed for the…