Related papers: Microscopic surface structure of C/SiC composite m…
Vibrational spectroscopy is the most effective, efficient and informative method of structural analysis of amorphous materials with silica matrix and, therefore, an indispensable tool for examining silicon oxycarbide-based amorphous…
Measurements of the microwave surface impedance $Z_s(T)=R_s(T)+iX_s(T)$ and of the complex conductivity $\sigma_s(T)$ of high-quality, high-$T_c$ single crystals of YBCO, BSCCO, TBCCO, and TBCO are analyzed. Experimental data of $Z_s(T)$…
Principal structural defects in graphene layers, synthesized on a carbon-terminated face, i.e. the SiC(000) face of a 4H-SiC substrate, are investigated using microscopic methods. Results of high-resolution transmission electron microscopy…
The interface between organic semiconductor [OSC]/ferromagnetic [FM] material can exhibit ferromagnetism due to their orbital hybridization. Charge/spin transfer may occur from FM to OSC layer leading to the formation of `spinterface' i.e.…
This paper presents an analysis of the conceptual design of a novel silicon suspension for the cryogenic test-mass mirrors of the low-frequency detector of the Einstein Telescope gravitational-wave observatory. In traditional suspensions,…
Cryogenically cooled microelectromagnet mirrors were used to reflect a cloud of free-falling laser-cooled 85Rb atoms at normal incidence. The mirrors consisted of microfabricated current-carrying Au wires in a periodic serpentine pattern on…
There is a direct relation between the composition of a host star and that of the planets orbiting around it. As such, the recent discovery of stars with unusual chemical composition, notably enriched in carbon instead of oxygen, support…
Hypothesis: Slippery Omniphobic Covalently Attached Liquids (SOCAL) have been proposed for making omnirepellent thin films of self-assembled dimethylsiloxane polymer brushes grafted from silica surfaces. Smooth and flat at very small scale,…
We investigated the superconducting (SC) properties of Ta-Nb-Hf-Zr-Ti high-entropy alloy (HEA) thin films with 0.5% weight C additives. The C additives stabilize the structural properties and enhance the SC critical properties, including…
The photo-luminescence features of Ge-oxygen defect centers in a 100nm thick Ge-doped silica film on a pure silica substrate were investigated by looking at the emission spectra and time decay detected under synchrotron radiation excitation…
We present the design and measured performance of a new carbon fiber strut design that is used in a cryogenically cooled truss for the Simons Observatory Small Aperture Telescope (SAT). The truss consists of two aluminum 6061 rings…
Nickel carbon based multi-layers are a viable route towards future hard X-ray and soft $\gamma$-ray focusing telescopes. Here, we study the Pulsed Laser Deposition growth conditions of such bilayers by Reflective High Energy Electron…
Tunable dielectric meta-surface nanostructures offer incredible performance in optical application due to their extraordinary tunability of the polarization and engineering the dispersion of light with low loss in infrared range. In this…
Surfaces of carbonaceous asteroids (C-complex) have shown diverse contrasting spectral variations, which may be related to space weathering. We performed laser irradiation experiments on CI and CM simulant material under vacuum to mimic the…
Silicon carbide is widely used in electronics, ceramics, and renewable energy due to its exceptional hardness and resistance. In this study, we investigate the effects of hydrostatic and uniaxial pressure (both compressive and tensile) on…
Silicene, a new two-dimensional (2D) material has attracted intense research because of the ubiquitous use of silicon in modern technology. However, producing free-standing silicene has proved to be a huge challenge. Until now, silicene…
Fused Silica is the material of choice for UV optical systems such as the projection optics in microlithography systems. Unfortunately fused silica is not stable under UV irradition and undergoes compaction and color center formation. The…
Silicon carbide (SiC) is the leading wide-bandgap semiconductor material, providing mature doping and device fabrication. Additionally, SiC hosts a multitude of optically active point defects (color centers) and is relevant for many…
Silicon carbide is a wide-bandgap semiconductor with an emerging CMOS technology platform and it is widely deployed in high power and harsh environment electronics. This material is also attracting interest for quantum technologies through…
Topological materials with both insulating and semimetal phases can be protected by crystalline (e.g. mirror) symmetry. The insulating phase, called topological crystalline insulator (TCI), has been intensively investigated and observed in…