Related papers: Carbon Nanotube Thin Film Field Emitting Diode: Un…
Owing to their distinct properties, carbon nanotubes (CNTs) have emerged as promising candidate for field emission devices. It has been found experimentally that the results related to the field emission performance show variability. The…
Nanometer thin single-walled carbon nanotube (CNT) films collected from the aerosol chemical deposition reactors have gathered attention for their promising applications. Densification of these pristine films provides an important way to…
Controlled growth, patterning and placement of carbon nanotube (CNT) thin films for electronic applications are demonstrated. The density of CNT films is controlled by optimizing the feed gas composition as well as the concentration of…
Carbon nanotube (CNT) based electronic devices are promising for beyond-silicon solid-state electronics and vacuum micro-nano-electronics. Despite rapid progress in CNT field-effect transistor related solid-state electronics, the…
We have studied photocurrent generation in large carbon nanotube (CNT) films using electrodes with different spacings. We observe that the photocurrent depends strongly on the position of illumination, with maximum observed response…
The electrolysis of CO$_2$ in molten carbonate has been introduced as an alternative mechanism to synthesize carbon nanomaterials inexpensively at high yield. Until recently, CO$_2$ was thought to be unreactive, making its removal a…
The material and electrical properties of the CNT single vias and array vias grown by microwave plasma-enhanced chemical vapor deposition were investigated. The diameters of multiwall carbon nanotubes (MWNTs) grown on the bottom electrode…
Because of their natural one-dimensional (1D) structure combined with intricate chiral variations, carbon nanotubes (CNTs) exhibit various exceptional physical properties, such as ultrahigh electrical and thermal conductivity, exceptional…
Using carbon nanotubes (CNTs) produced by chemical vapor deposition, we have explored different strategies for the preparation of carbon nanotube devices suited for electrical and mechanical measurements. Though the target device is a…
Carbon nanotubes (CNTs) are currently considered a successor to silicon in future nanoelectronic devices. To realize this, controlled growth of defect-free nanotubes is required. Until now, the understanding of atomic-scale CNT growth…
In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various…
When a liquid film lies on a non-wettable substrate, the configuration is unstable and the film then retracts from a solid substrate to form droplets. This phenomenon, known as dewetting, commonly leads to undesirable morphological changes.…
Carbon nanotube (CNT) fibres are firmly established as a new high-performance fibre, but their tensile mechanical properties remain a relatively small fraction of those of the constituent CNTs. Clear structure-property relations and…
We perform systematic numerical simulations for carbon nanotube (CNT) film microstrip antennas to fabricate flexible and durable applications in terms of various device design parameters. The selection of appropriate materials for…
Carbon nanotubes (CNT) have been recently proposed as stabilizers against grain growth that can happen even at low temperature inputs in nano-crystalline and ultrafine-grained materials obtained by severe plastic deformation. In this study,…
The controlled growth of carbon nitride (CN) films with tailored electronic properties and surface area is quite challenging due to the solid-state reaction and the lack of efficient interaction between C-N monomers and substrates. Herein,…
Transistors incorporating single-wall carbon nanotubes (CNTs) as the channel material are used in a variety of electronics applications. However, a competitive CNT-based technology requires the precise placement of CNTs at predefined…
Electron field emission characteristics of individual multiwalled carbon nanotubes have been investigated by a piezoelectric nanomanipulation system operating inside a scanning electron microscopy chamber. The experimental setup ensures a…
As the aerospace industry becomes increasingly demanding for stronger lightweight materials, the ultra-strong carbon nanotube (CNT) composites with highly aligned CNT network structures could be the answer. In this work, a novel methodology…
Carbon nanotube (CNT) is expected for much more important and broader applications in the future, because of its amazing electrical and mechanical properties. However, today, the prospect is detained by the fact that the growth of CNTs…