The CMS Magnetic Field Map Performance
Abstract
The Compact Muon Solenoid (CMS) is a general-purpose detector designed to run at the highest luminosity at the CERN Large Hadron Collider (LHC). Its distinctive featuresinclude a 4 T superconducting solenoid with 6 m diameter by 12.5 m long free bore, enclosed inside a 10000-ton return yoke made of construction steel. Accurate characterization of the magnetic field everywhere in the CMS detector is required. During two major tests of the CMS magnet the magnetic flux density was measured inside the coil in a cylinder of 3.448 m diameter and 7 m length with a specially designed field-mapping pneumatic machine as well as in 140 discrete regions of the CMS yoke with NMR probes, 3-D Hall sensors and flux-loops. A TOSCA 3-D model of the CMS magnet has been developed to describe the magnetic field everywhere outside the tracking volume measured with the field-mapping machine. A volume based representation of the magnetic field is used to provide the CMS simulation and reconstruction software with the magnetic field values. The value of the field at a given point of a volume is obtained by interpolation from a regular grid of values resulting from a TOSCA calculation or, when available, from a parameterization. The results of the measurements and calculations are presented, compared and discussed.
Keywords
Cite
@article{arxiv.1110.0607,
title = {The CMS Magnetic Field Map Performance},
author = {V. I. Klyukhin and N. Amapane and V. Andreev and A. Ball and B. Curé and A. Hervé and A. Gaddi and H. Gerwig and V. Karimaki and R. Loveless and M. Mulders and S. Popescu and L. I. Sarycheva and T. Virdee},
journal= {arXiv preprint arXiv:1110.0607},
year = {2011}
}
Comments
4 pages, 4 figures, 17 references