Robust Transmission Design for RIS-Assisted RSMA-SWIPT Systems With Movable Antennas Under Hardware Distortions

This paper investigates a robust transmission design for a multi-user rate-splitting multiple access (RSMA)-based simultaneous wireless information and power transfer (SWIPT) system empowered by movable antennas (MAs) and a reconfigurable intelligent surface (RIS) under channel state information (CSI) uncertainty and residual hardware impairments (HIs). The effective channels in MAs-enabled systems depend on antenna positions, causing CSI uncertainty to affect not only active and passive beamforming but also antenna position optimization. Furthermore, residual HIs distort the effective SINRs, creating additional coupling among beamforming, RIS reflection control, common-rate allocation, power-splitting ratio optimization, and antenna position optimization. Consequently, the joint impact of CSI uncertainty and HIs leads to a highly coupled and challenging resource allocation problem. To address this challenge, we propose a robust resource allocation framework that jointly optimizes common-rate allocation, transmit beamforming, RIS reflection coefficients, power-splitting ratios, and MAs positions to maximize the achievable sum-rate while satisfying practical system constraints. To obtain an efficient solution, the original problem is decomposed into active beamforming, RIS reflection design, power-splitting ratio optimization, and MAs position optimization subproblems, where tractable convex surrogate functions are constructed to handle the non-convex objective and constraints. Simulation results verify the effectiveness of the proposed framework and demonstrate substantial improvements in achievable sum-rate, robustness against CSI uncertainty and hardware impairments, and convergence performance compared with benchmark schemes.