Finite-size evaporating droplets in weakly compressible homogeneous shear turbulence

We perform interface-resolved simulations of finite-size evaporating droplets in weakly-compressible homogeneous shear turbulence (HST). The study is conducted by varying three dimensionless physical parameters: the initial gas temperature over the critical temperature $T_{g,0}/T_c$, the initial droplet diameter over the Kolmogorov scale $d_0/\eta$ and the surface tension, i.e. the shear-based Weber number, $We_{\mathcal{S}}$. For the smallest $We_{\mathcal{S}}$, we first discuss the impact on the evaporation rate of the three thermodynamic models employed to evaluate the gas thermophysical properties: a constant property model and two variable-properties approaches where either the gas density or all the gas properties are allowed to vary. Taking this last approach as reference, the model assuming constant gas properties and evaluated with the "1/3" rule, is shown to predict the evaporation rate better than the model where the only variable property is the gas density. Moreover, we observe that the well-known Fr\"ossling/Ranz-Marshall correlation underpredicts the Sherwood number at low temperatures, $T_{g,0}/T_c=0.75$. Next, we show that the ratio between the actual evaporation rate in turbulence and the one computed in stagnant condition is always much higher than one for weakly deformable droplets: it decreases with $T_{g,0}/T_c$ without approaching unity at the highest $T_{g,0}/T_c$ considered. This suggests an evaporation enhancement due to turbulence also in conditions typical of combustion applications. Finally, we examine the overall evaporation rate and the local interfacial mass-flux at higher $We_{\mathcal{S}}$, showing a positive correlation between evaporation rate and interfacial curvature, especially at the lowest $T_{g,0}/T_c$.