English

Deposition of Ga2O3 thin films by liquid metal target sputtering

Materials Science 2023-01-11 v1 Applied Physics

Abstract

This paper reports on the deposition of amorphous and crystalline thin films of Ga2O3 by reactive pulsed direct current magnetron sputtering from a liquid gallium target onto fused (f-) quartz and c plane (c-) sapphire substrates, where the temperature of the substrate is varied from room temperature (RT) to 800{\deg}C. The deposition rate (up to 37 nm/min at RT on f-quartz and 5 nm/min at 800{\deg}C on c-sapphire) is two to five times higher than the data given in the literature for radio frequency sputtering. Deposited onto unheated substrates, the films are X-ray amorphous. Well-defined X-ray diffraction peaks of \b{eta}-Ga2O3 start to appear at a substrate temperature of 500{\deg}C. Films grown on c-sapphire at temperatures above 600{\deg}C are epitaxial. However, the high rocking curve full width at half maximum values of {\approx} 2.4-2.5{\deg} are indicative of the presence of defects. A dense and void-free microstructure is observed in electron microscopy images. Composition analysis show stoichiometry close to Ga2O3 and no traces of impurities. The optical properties of low absorptance (<1%) in the visible range and an optical band gap of approximately 5 eV are consistent with the data in the literature for Ga2O3 films produced by other deposition methods.

Keywords

Cite

@article{arxiv.2301.03845,
  title  = {Deposition of Ga2O3 thin films by liquid metal target sputtering},
  author = {Martins Zubkins and Viktors Vibornijs and Edvards Strods and Edgars Butanovs and Liga Bikse and Mikael Ottosson and Anders Hallén and Jevgenijs Gabrusenoks and Juris Purans and Andris Azens},
  journal= {arXiv preprint arXiv:2301.03845},
  year   = {2023}
}

Comments

15 pages, 6 figures